Skil ME981901 Guide D'utilisation page 26

Hold
To hold and display the
measurement in the digital leveling
mode, press the Main Button
when the required measurement
is displayed: the LCD screen will
display "HOLD" (FIG. 16).
To release the hold, press the Main
Button again or press the Down
Arrow Button for 1 second.
NOTE: When entering into the
relative angle measurement mode
and the icon
you may press the Main Button
to hold the measurement in the
LCD display (FIG. 17). When both
the Hold and REF functions are
activated, press the Down Arrow
Button for more than 1 second;
the tool will go back to the initial
absolute angle measurement mode
without the hold and the icon
26
is displayed,
Fig. 16
Fig. 17
.