Operating Instructions - Skil ME981901 Guide D'utilisation

OPERATING INSTRUCTIONS

WARNING
circuit, never immerse your tool or charger in fluid or allow
a fluid to flow inside it. Corrosive or conductive fluids, such as
seawater, certain industrial chemicals, and bleach or bleach
containing products, etc., can cause a short circuit.
Charge The Tool
NOTE: The tool is shipped partially charged; charge the battery
before first use.
Optimum performance can be reached by recharging the tool
for approximately 2.5 hours
recharge the tool for more than 24 hours after each use.
a. Insert the USB interface of the USB charging cable into the USB
port of the USB wall adapter (not included).
b. Insert the charging plug into charging port of the tool, making sure
that they are properly connected. (FIG. 2)
c. Connect the wall adapter (together with USB charging cable) to
the power outlet. The tool will turn on automatically. The battery
indicator will begin to flicker on the LCD display to indicate that
the tool is charging.
To reduce the risk of fire, personal injury,
and product damage due to a short
after use. It is not recommended to
13