Skil ME981901 Guide D'utilisation page 14

When charging is complete, the full-battery indicator will appear
on the LCD screen.
from tool. If the USB charging cable remains connected to the tool,
the tool will turn off approximately after half an hour.
Fig. 2
Turn The Tool On And Off
Press the Main Button to turn on the tool. Press and hold the Main
Button for 1 second to turn off the tool.
WARNING
measuring tool in a position that may cause anyone to stare into the
laser intentionally or unintentionally. Serious eye injury could result.
NOTE: When the tool is inactive for 3 minutes (after the laser has
turned off) in any mode except the digital leveling mode, it will
automatically turn off to save battery power. When in the digital
leveling mode, the tool will automatically turn off after 6 minutes
of inactivity, which is defined as the deviation (both positive and
negative) angle range not exceeding 1.5°.
14
Remember to remove the USB charging cable
USB Interface
The laser will be automatically activated when
the tool is turned on. DO NOT place the
Charging Plug
Charging Port