Technical Data - SKF TIH 100m Mode D'emploi

2.2 Technical data

TIH 100m
Voltage
Tolerance en voltage
Recommended line protection
Power consumption (maximum)
Temperature control
Probe type
Probe maximum temperature
Time mode
Power range
Demagnetization
Overall dimensions (w x d x h)
Area between supports (width x height)
Coil diameter
Weight (with yokes)
Workpiece maximum weight
Maximum heating temperature
m *
20
Standard yoke dimensions:
56 x 56 x 296 mm
(2.2 x 2.2 x 11.7 in)
28 x 28 x 296 mm
(1.1 x 1.1 x 11.7 in)
14 x 14 x 296 mm
(0.6 x 0.6 x 11.7 in)
*m represents the weight (kg) of the heaviest SRB 231 bearing that can be heated from 20 to
20
110 °C (68 to 230 °F) in 20 minutes.
SKF TIH 100m
TIH 100M/230V : 230V / 50 - 60Hz
TIH 100M/MV : 400 - 460V / 50 - 60Hz
± 10%
16 A fuse rating for 230 V
10 A fuse rating for 400 - 460 V
3,6 kVA for 230 V
4,0 - 4,6 kVA for 400 - 460 V
0 - 250 °C (32 - 482 °F); in steps of 1°
Thermocouple, K type
250 °C (482 °F)
0 - 60 minutes; in steps of 0,1 minute
100% - 50%
automatic; residual magnetism <2A/cm
570 x 230 x 350 mm
(22.4 x 9.0 x 13.7 in)
155 x 205 mm (6.1 x 8.0 in)
110 mm (4.3 in)
For minimum bearing bore diameter of
120 mm (4.7 in)
42 kg (92 lbs)
Bearing: 120 kg (264 lbs)
Solid component: 60 kg (132 lbs)
approx. 250 °C (482 °F)
Depending on bearing or workpiece
weight. For higher temperatures,
please contact SKF.
97 kg (bearing 23156)
For minimum bearing bore diameter of:
80 mm (3.1 in)
40 mm (1.6 in)
20 mm (0.8 in)
7