Installation Of Mains Plug - SKF TIH 100m Mode D'emploi

3. Installation of mains plug

A qualiied electrician must install a suitable mains plug.
The correct supply voltage is shown in section 2.2.
The wires should be connected as follows:
TIH 100M/230V
Colour of TIH 100m/230V
yellow / green
blue
brown
TIH 100M/MV
Colour of TIH 100m/MV wire
yellow / green
blue
brown
Connect the TIH 100M/MV to only two of the three phases in order to obtain 400-460 V.
8
Mains supply terminal
ground
neutral
phase
Mains supply terminal
ground
phase
phase
SKF TIH 100m