i.t.works 2040 Manuel D'instructions page 19

2040 Manual-E/F/(515542-00)
TAKING A PICTURE
How to change the quality:
1. Press the MENU button in the (
2. Press to highlight Quality.
3. Press to enter the submenu.
4. Press or
5. Press the OK button to select.
6. Press the MENU button or press
to return to picture taking mode.
WHITE BALANCE
The Auto White Balance feature provides optimal color reproduction under different lighting
conditions. This is the default setting. You can change this setting for specific lighting
conditions.
MAIN MENU
Mode
M
Size
Quality
Flash
White Balance Mode
AWB Auto
Sunny
Fluorescent
Tungsten
How to change the White Balance:
1. Press the MENU button in (
2. Press until WB is highlighted.
3. Press to enter its submenu.
4. Press or
5. Press the OK button to select.
6. Press the MENU button or press
to return to picture taking mode.
2004:04:30
) Camera Mode.
until the desired setting is highlighted.
until (
MAIN MENU
EV
+
–
WB
WB
Brightness
Setup
The camera will automatically choose the white balance setting.
Use this setting in variable conditions.
Use outdoors with sufficient sunlight.
Use indoors with fluorescent or ambient light conditions.
Use indoors with tungsten light conditions.
) Camera Mode.
until the desired setting is highlighted.
until (
17
5:53 PM Page 17
) Main Menu is highlighted then press
WB
AWB
Sunny
Fluorescent
OK
Description
) Main Menu is highlighted then press
MENU