i.t.works 2040 Manuel D'instructions page 12

2040 Manual-E/F/(515542-00)
T AKING A PICTURE
T AKING A PICTURE
TAKING A PICTURE WITH THE VIEWFINDER
How to take picture with the viewfinder:
1. Press ( ) Power button to turn the camera on.
2. Set the camera to (
• The LCD can be switched off to conserve battery power by pressing the (
3. Frame the subject in the viewfinder
4. Press the shutter button to capture the image.
• When the image has been captured, the Flash Ready LED next to the viewfinder will
blink to indicate that the image is being stored.
Flash Ready LED Status
Steady
Blinking
Note: Do not power the camera off or switch modes while the camera is capturing or
storing a picture or video clip to prevent corrupting the stored image.
2004:04:30 5:53 PM
) Camera Mode.
The camera is in capture mode. Hold the camera steady to
prevent blurry pictures.
A
The flash is recharging. You may move the camera in this
AWB
mode.
10
Page 10
TAKING A PICTURE
Description
1600
A
1600
AWB
005/042
005/042
) button.