Télécharger Imprimer la page

Binatone HAS-451 Mode D'emploi page 5

Publicité

Les langues disponibles

Les langues disponibles

All manuals and user guides at all-guides.com
SPECIAL SAFETY MEASURES
Care should be taken to prevent foreign objects
from entering the appliance as they may cause
motor failure and premature breakdown of the
appliance as well as electric shock.
Never cover the appliance during use. When
using the hairdryer, make sure the air filter is clean
and not blocked.
Switch the appliance off when not in use even if it is for a short
period of time.
Do not use the appliance near a bathtub, washbasin, pool or
other sources of water.
Avoid direct contact between attachments and your skin.
For extra safety we recommend the installation of a residual
current device (RCD) with a tripping current of no more than
30 mA in the mains circuit of the bathroom. Consult a qualified
electrician for help.
This appliance is equipped with an automatic overheat protec-
tion. When overheated, the appliance will switch itself off. In
cases of overheating unplug the appliance from the wall out-
let. Let the appliance cool down for several minutes and then
plug it in again.
PARTS OF THE APPLIANCE
1. Hair dryer body
2. Power switch «O/I»
3. Lever
4. Small clamp to fit attachments
5. Hair clamp
6. Curling iron with ceramic coating
7. Stand
8. Hanging loop
9. Rotating power cord
10.Set of 10 hair rollers with grips
5 large size hair rollers
5 small size hair rollers
11.Brush attachment
BEFORE USING
THE APPLIANCE
Remove all packing materials from the appli-
ance.
5

Publicité

loading