Publicité
Les langues disponibles
Les langues disponibles
Rear Panel
5
1.
SCART JACK
- Connect to a TV scart input jack
2.
DIGITAL AUDIO OUT JACKS
- Use either an optical or coaxial digital cable to con-
nect to a compatible Dolby Digital receiver.
- Use either an optical or coaxial digital cable to con-
nect to an A/V Amplifier that contains a Dolby Digital,
MPEG2 or DTS decoder.
3.
HDMI OUT JACK
- Use the HDMI cable to connect this jack to the HDMI
jack on your television for the best quality picture.
Note
- Consult your TV User's Manual to find out if your TV supports Progressive Scan (P-SCAN).
If Progressive Scan is supported, follow the TV User's Manual regarding Progressive Scan settings in
the TV's menu system.
- The HDMI output of this unit can be connected to a DVI jack on a TV or other device using a conver-
sion adapter. In this case, it is necessary to use a TV or display with an HDCP-compatible DVI input.
- There may be no image output if the DVD player is connected to a TV or display that is not compatible
with the above format.
- Refer to the TV's instruction manual for detailed information regarding the HDMI terminal.
- See pages 29 ~ 30 to get more information on how to use the setup menu.
1
2
- If an HDMI cable is connected to an HDMI-compati-
ble TV, HDMI will be output automatically within 10
seconds.
4.
VIDEO OUT JACK
- Use a video cable to connect to the Video input jack
on your television.
5.
5.1CH ANALOG AUDIO OUT JACKS
- Connect to an amplifier with 5.1ch analog input jacks.
2
3
4
7
Publicité
