Hansgrohe PuraVida 15473 1 Serie Instructions D'installation page 6

2.
1.
2.
6
English
Install the 6 screws (the 3 reserved screws from the
flush housing plus the 3 included with the tub filler).
Tighten the screws using an 8 mm Allen wrench.
Lower the escutcheon to the floor ().
Place the black rubber washer in one end of the
hose. Attach this end to the tub filler.
Place the screen washer in the other end of the hose.
Attach this end to the handshower.
Rest the hand shower in the holder.
1.
Seal the floor around the plaster
shield with waterproof sealant
(1).
Failure to seal the floor can lead
to possible water damage.