Axis Communications P33-VE Serie Guide D'installation page 22

AXIS P33–VE Network Camera Series
Rotate the Lens
Note
The marking on the lens cover is by default oriented facing upwards (wall mount).
1. Open the Live View page, see Access the Product on page 25.
1 Locking screw
2
Lens holder
3
Marking (design A)
4
Marking (design B)
2. Loosen the locking screw.
3. Check the Live View page and turn the lens holder to rotate the lens 90° or 180°.
4. Once satisfied, gently tighten the locking screw to secure the lens holder's position.
Tilt the Lens
NO TICE TICE
NO NO TICE
Valid for AXIS P3365–VE/P3367–VE/P3384–VE: The lens should not be tilted more than
90°, this may cause damage to the product. Follow the instructions below.
22