Axis Communications P33-VE Serie Guide D'installation page 17

1
Metal conduit (not included)
Perform the hardware installation in the following order:
1. Prepare the Network Cable
2. Replace Clear/Smoked Dome Cover (Optional)
3. Route the Cables
4. Install the Camera Unit
5. Adjust the Position of the Lens
6. Adjust Focus and Zoom
7. Complete the Installation
Prepare the Network Cable
Note
• Do not force the network connector into the gasket.
• Do not pierce the gasket with a knife or other sharp object.
AXIS P33–VE Network Camera Series
17