Bosch Tassimo TAS 20 UC Série Mode D'emploi page 68

10
2a
2b
¡
CauTiOn
To avoid risk of burn or scalding:
– Wait until orange light is displayed
before opening the brewing unit.
– Do not open the brewing unit during
the brewing process.
– Do not touch the piercing unit
immediately after brewing.
– Please note that the beverages are
very hot when dispensed.
– T DISC is hot after brewing, please
handle with care.
Bosch Home Appliances
TAS20_UC.indb 10
2 Customized (manual operation):
a For a stronger taste and a smaller
drink: Start the brewing process by
pressing the start / stop button.
O
Automatic icon will fl ash. Press the
start / stop button at any stage during the
brewing process to stop the process early
and adjust the drink to your individual
taste. Your drink is now ready.
icon lights up for 20 sec.
b For a milder fl avor and a larger drink:
Start the brewing process by pressing
the start / stop button.
fl ashes. When the automatic brewing
process is complete,
up. If you press and hold the start / stop
button within 20 seconds, you can extend
the brewing process to get your desired
drink strength.
►
Do not open the brewing unit to remove
the T DISC until the orange stand-by light
is on.
►
Open the brewing unit and remove the
T DISC. Now you can sit back and enjoy
your hot drink. If you wish, you can
prepare the next drink immediately.
►
If you do not wish to prepare more
drinks, we recommend that you turn off
your TASSIMO machine using the on/off
switch.
!
note:
►
There may be short pauses during the
brewing process. This is so the drink
fl avor is optimized.
►
Do not remove the water tank during the
brewing process.
►
Always remove the T DISC after the
brewing process when the orange Stand-by
light comes on. Be careful and hold it by the
tab because the T DISC is hot after brewing
your drink. When removing the T DISC,
quickly fl ip it over so that the printed side is
face up to avoid any dripping.
en
N
Manual
O
Automatic icon
N
Manual icon lights
28.03.2013 11:03:15