identités NEO XL Notice D'utilisation page 9

same height and that the rollator is not wobbly. (Figure 7)
h. Insert the handles into the frame, making sure that the
outside the rollator frame. (Figure 8)
i. Adjust the height of the handles as required by pressing
on the handle tubes (image 9). Make sure that both
at the same height.
NOTE: Make sure that all four wheels are positioned at the same height before each use.
USE
OPEN THE ROLLATOR
•
Hold the handles and press down on the seat until all four wheels are aligned and the seat is
completely flat.
•
Before using the rollator, make sure that all four wheels are in contact with the floor and that the
rollator is
stable in the open position.
FOLDING THE ROLLATOR
•
Lift the seat and lift the seat support bar until the rollator closes as
shown in Figure 2.
•
For more compact storage, pull the backrest up.
ADJUST THE HEIGHT OF THE HANDLES
Note: Do not remove the inner tube from the outer tube when adjusting the
height of the handles.
DMI-F-10_Annexe 3_Notice.4
Mai 2023
cables are all
the buttons
handles are
Page 9 sur 17