Publicité
Les langues disponibles
Les langues disponibles
The controller regulates the safe maximum
speed and protects the motor and all mov-
ing parts from damages caused by excessive
speeds. In the event of an issue, seek out spe-
cialised help.
• Always shut down the shredder (power unit
must be disconnected from the mains) when
you leave the work area.
• Do not tilt the machine when the motor is run-
ning.
2.3 Maintenance and Storage
• If the machine is deactivated for maintenance,
inspection, storage, or for exchanging a part,
(power unit must be disconnected from the
mains), ensure that all moving parts are still
and any tools/spanners have been removed.
Let the machine cool before any inspection or
repair.
• When maintaining the blade mechanism,
make sure that the the power source cannot
activate due to the protective locking device;
the blades could always be activated by a
hand-start mechanism.
2.4 Additional Safety Instructions for Devices
with Collecting Containers
• Shut down the shredder before attaching or
removing the collecting container.
GB | Operating Instructions
GB-5
Publicité
