Pairing And Deleting The Wireless Key Switch; Pairing The Wireless Key Switch With The Secvest Wireless Alarm Panel And Deleting It - Abus FUBE50061 Manuel D'installation Et D'utilisation

8.6. Pairing and deleting the wireless key switch

The wireless key switch is taught in to the wireless alarm panel in the same
way as a normal wireless control panel.
Only in operating mode 1
In addition, the operating steps for pairing a wireless alarm panel with an
info module should also be carried out.
8.6.1. Pairing the wireless key switch with the Secvest wireless
alarm panel and deleting it
1. In installer mode, select the menu item "(Other) components 
Wireless control panel  Add/delete wireless control panel", and
select a wireless control panel. Transmit the pairing signal from the
wireless key switch to the wireless alarm panel by pressing a
sabotage switch multiple times.
2. Once the pairing signal has been picked up by the wireless alarm
panel, it will emit two beeps and the symbol
the selected wireless control panel.
3. Exit this menu item.
Note
To delete the wireless key switch, go to installer mode and select the menu
item "(Other) components  Wireless control panel  Add/delete wireless
control panel". Select the corresponding wireless control panel and deleted
it by following the instructions on the display.
EN 19
will appear behind