Philips PR3140 Mode D'emploi page 9

Caution
- If the wall socket used to power the device has poor connections, the plug of the device becomes
hot. Make sure you plug the device into a properly connected wall socket.
- Do not subject the device to heavy shocks.
- Always unplug the device after use and in case of a power failure.
- Place the device on a stable, level surface. Keep at least 35 cm of free space around the device to
prevent overheating (Fig. 5).
- Make sure the vents in the back of the device remain open during use.
- Do not cover the device with, for example, a cloth or a piece of clothing when it is switched on.
- The device is equipped with an automatic protection against overheating. If the device is
insufficiently cooled (e.g. because the cooling vents are covered), the device switches off
automatically. Remove the cause of overheating. Once the device has cooled down, it can be
switched on again by turning the timer knob.
- To avoid getting your fingers hurt when you adjust the height, hold the lamp housing by the
handgrip and height adjustment ring as long as the height adjustment rings are unlocked.
- Let the device cool down for approx. 15 minutes before you touch, clean or store it.
- If you have just been swimming or have just taken a shower, make sure you dry your skin properly
before you use this device.
- Never use the device when the glass plate (filter) is damaged, broken or missing.
General
The warning signs and symbols are essential to ensure that you use this product safely and correctly
and to protect you and others from injury. Below you find the meaning of the warning signs and
symbols on the label and in the user manual.
This symbol indicates that you have to read the user manual carefully before you use the
device. Save the user manual for future reference.
This symbol warns you against hot surfaces.
This symbol indicates that the user should consult the user manual for important safety
information such as contraindications, warnings and cautions that cannot, for a variety of
reasons, be presented on the device itself.
This symbol indicates that this device is double insulated (Class II). This device meets the
requirements of Medical Device Directive 93/42/EEC.
This symbol indicates the manufacturer: Philips Consumer Lifestyle B.V, Tussendiepen 4,
9206 AD Drachten, The Netherlands.
This symbol indicates that this product shall not be disposed of with normal household
waste (2012/19/EU). See chapter 'Recycling'.
English
9