Qualified Personnel - Huba Control 711 Mode D'emploi

Qualified Personnel

are persons familiar with the insallation, assembly, commisioning and ope-
ration of the product and who have the appropriate qualifications for their
activities such as:
• training or instruction or authorization to operate and maintain devices/
systems according to the standard of safety technology for elecrical
circuits, high pressures and corrosive as well as hazardous media.
• for devices with explosion protection: training or instruction or authori-
zation to be allowed to work on electrical circuits for potentially explosive
systems.
• training or instruction according to the standards of safety engineering in
the care and use of suitable safety equipment.
Only trained qualified personnel shall execute this work.
Modules which are sensitive to electrostatic charge may be destroyed by
voltages which are far below the human level of perception. These voltages
occur already when you touch a component or electrical connections of a
module without first discharging yourself electrostatically. The damage in-
curred by a module as a result of an overvoltage is not usually immediate-
ly perceptible but only becomes noticeable after a long time in operation.
Therefore, a suitable equipotential bonding must be guaranteed when repai-
ring the device.
The date of manufacture can be seen on the label of the
pressure transmitter, for example:
Date as ıyear-month-day„
3 digits of the order number
Order position
Single part number
(1) YYMMDD - example 100912
Huba Control AG - Type 711 - Edition 10/2018 - 119052
(1)
YYMMDD-XXX-XX-XXXX
15