Hansgrohe Ecostat 04222 0 Serie Instructions D'installation page 4

1.
4
2.
1.
2.
English
Installation
Cut the plaster shield so that it extends ¹⁄₁₆" out-
side the surface of the finished wall.
Seal the wall around the
plaster shield with water-
proof sealant (1).
Failure to seal the wall
can lead to possible water
damage.
Install the slip coupling (2).
Cut the slip coupling so that it extends ⅝" outside
the surface of the finished wall (1).
Install the extension spindle (2).