Publicité
Les langues disponibles
Les langues disponibles
4 Slide the [ ] under [Custom Eco] to the [Power Save] side.
There are 10 levels between the standard mode and power saving mode.
5 Select [Save setting to the drive].
The set values will be saved to the drive. Settings will be retained even after turning off the device
power.
Cautions in usage
• The default setting is standard mode.
• If power to the drive is turned off without selecting the [Save setting to the drive] checkbox, the
settings will revert to the previously saved settings.
®
• In a Windows
environment, the setting can be changed at any time using the Pioneer BD Drive
Utility, when the drive is recognized.
• Custom Eco settings can only be changed in Windows. After changing the settings in Windows,
the device can be used with a Mac
PureRead
Explanation of PureRead function
When using this device to read a music CD, you can use PureRead. This function allows the device to
work to acquire and reproduce the original sound as much as possible such as by repeatedly reading
scratched or soiled parts of the CD. PureRead can be set to the following two modes or turned off.
Master Mode
(default setting)
Perfect Mode
OFF
®
.
This mode works to acquire and reproduce the original sound as much
as possible, but if it encounters audio data that cannot be completely
reproduced, it interpolates that data and continues with acquisition.
This mode reproduces the original sound, and if it encounters audio data that
cannot be completely reproduced, it stops and halts acquisition.
This mode carries out normal acquisition of music CD data. If there is a
scratch that prevents reading, interpolation will occur.
Useful Functions
BDR-XD08UMB-S
23
En
Publicité
