AudioSonic HF-1256ITR Mode D'emploi page 7

CD OPERATION
Program
Up to 20 tracks can be programmed for disc play in any order.
Be sure to press the "STOP" button before use.
• Press the "PROGRAM" button, the display will show "00" and flash.
• S elect desired track by using the "SKIP +" or "SKIP -" button.
• P ress the "PROGRAM" button again to confirm desired track into the program memory.
• R epeat step 2 and 3 to enter additional tracks into the program memory.
• W hen all the desired tracks have been programmed. Press the "PLAY / PAUSE"
button to play the disc in the order you have programmed and the program
indicator flashes.
• P ress the "STOP" button once to terminate programmed play and the program
indicator will turn off.
• T he program indicator does not flash after setting up programmable play.
Repeat
Press the "REPEAT" button before or during playing CD, a single track or all the tracks
can be repeated. Each press switches the repeat mode as follows:
1 - REPEAT 1 ( The repeat indicator is flashing. )
2 - REPEAT ALL ( The repeat indicator is steadily on. )
3 - NORMAL PLAYBACK
1. . 1. 1.
en
Instruction Manual
7