Maintenance Plan; Cleaning - Zipper Maschinen ZI-RD300 Mode D'emploi

29 MAINTENANCE
No cleaning, upkeep, checks or maintenance when machine is running
The machine does not require intense maintenance. However, to ensure a long lifespan, we strongly
recommend following the upkeep and maintenance plan.
Repairs must be carried out by specialists! Use original ZIPPER parts only!
Only a properly maintained equipment may be a satisfactory tool. Care and maintenance deficiencies
can cause unpredictable accidents and injuries.
Repairs should be performed only by authorized service centers.
Improper operation may damage the equipment or endanger your safety.
29.1

Maintenance plan

Loose or lost screws, nuts, bolts
Damage of any part of the machine
Fuel tank of tightness
Tires checking
Machine cleaning
Cleaning spark plug
Cleaning air filter
Oil level checking
29.2

Cleaning

Clean the machine and the working attachment from soil, dust, grass, chips, and small twigs, etc.
The use of solvents, harsh chemicals or abrasive cleaners leads to damage to the
machine!
Therefore: When cleaning, use only mild detergent
The use of high pressure cleaners is not recommended. It shortens the service life and reduces the
operational integrity. (Water can get into the gear!)
Impregnate bare surfaces of the machine against corrosion (e.g., anti-rust WD40)
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
ZI-RD300
Shut off the machine and let it cool down before start servicing!
NOTICE
Controls for the maintenance of the machine
NOTICE
ATTENTION
Regularly prior to each operation
Regularly prior to each operation
Regularly prior to each operation
Regularly prior to each operation
Regularly after operation
Every 25 working hours
Every 20-30 working hours
Every 50 working hours
MAINTENANCE
34