Assembly - Zipper Maschinen ZI-RD300 Mode D'emploi

27

ASSEMBLY

Please check the product contents immediately after receipt for any eventual transport damage or
missing parts. Claims from transport damage or missing parts must be placed immediately after initial
machine receipt and unpacking before putting the machine into operation. Please understand that
later claims cannot be accepted anymore.
27.1 Assembly
A Wheels:
Mount the wheels and fasten them with M12X30
bolts, washers and nuts.
B Handle frame:
Mount the handle frame assembly to the chasis
and secure it with M10X25 bolts, washers and
nuts at the front and M10X45 bolts, washers
and nuts at the rear.
C Dump box:
Install the dump box and fasten the front with
two Ø4 R-clips.
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
ZI-RD300
ASSEMBLY
30