Publicité
Les langues disponibles
Les langues disponibles
The Sounddecoder
▪ Locomotive Settings
The Sounddecoder has been optimally adjusted to this locomotive. You can still adapt numerous decoder properties to your wishes however.
Certain parameters (referred to as CVs – Configuration Variable – or register) can be amended.
Please check before each programming if this is really necessary. Incorrect settings can result in the decoder not reacting correctly.
The decoder is preprogrammed with 28/128 speed steps at the factory for a high level of comfort. This means that it can be used together
with all of the modern DCC (MULTIMAUS) and Motorola® control devices.
The Sounddecoder has been especially modified for the additional functions and
must not be replaced with a decoder which is available from a retailer.
If the locomotive is to be reprogrammed, only the locomotive is to be on the
programming track
27
Publicité
