AUDIOropa xepton RP-1 Mode D'emploi page 21

The repeater is located between channel group A (transmitter T-1 and an unli-
mited amount of RX-1 receivers) and channel group B (Two TRX-1 transceivers
and an unlimited amount of RX-1 receivers). Both channel groups can commu-
nicate with each other.
Settings:
Channel group A: The transmitter T-1 is set as MASTER. Unit A of the repeater
Channel group B: Unit B of the repeater is set as MASTER. The transceivers
4.3 One-sided communication between transmitter TX-1 and
two TRX-1 tranceivers
The repeater is located between channel group A (transmitter TX-1 and an unli-
mited amount of RX-1 receivers) and channel group B (Two TRX-1 transceivers
and an unlimited amount of RX-1 receivers). Channel group A can only hear
the transmission of the TX-1 transmitter. Channel group B hears the transmissi-
on of channel group A and the transmission of channel group B.
Settings:
Channel group A: The transmitter T-X1 is a MASTER unit by default. Unit A of
Channel group B: Unit B of the repeater is set as MASTER. The transceivers
is set as not-MASTER (ID ≠ 00).
TRX-1 are set to a different ID (not-MASTER).
the repeater is set as not-MASTER (ID ≠ 00).
TRX-1 are set to a different ID (not-MASTER).
English 21