Configuration; Hardware Kit Contents; Tools Required - Aria BKRTR Manuel D'utilisation

DO NOT install the ARIA® POSTURAL BACKREST assembly onto back canes with an outside diameter greater
than 1" (25mm) or less than 3/4" (19mm). Otherwise, injury or damage may occur. The ARIA® POSTURAL
BACKREST is not intended for power seating applications.The mounting position of the ARIA® POSTURAL
BACKREST is directly related to the wheelchair's stability. It may be necessary to reposition the front casters,
rear wheels, back angle, tilt-in-space, recline position and/or seat depth before use. Ensure the ARIA®
POSTURAL BACKREST is properly secured to the wheelchairbefore using. Otherwise injury or damage may
occur.
ATTENTION !
The best way to avoid problems related to pressure sores is to understand
their causes and your role in a skin management program. Your therapist
and physician should be consulted if you have questions regarding individual
limitations and needs.All back cushions should be selected carefully. Working
with your therapist and physician is the best way to assure that a cushion choice
matches your individual needs. As the needs of the individual become more
complex, the evaluation becomes more important.

3. CONFIGURATION

3.1 HARDWARE KIT CONTENTS

IMPORTANT !
The screws are sold separately.
If any of the hardware is missing or misplaced, please contact our customer
service department and arrangements will be made to send you the necessary
replacements.
1. Fireproof foam padding with breathable coating (size chosen when ordering).
2. Rubber gasket for carbon fi ber elements cod.VAR2
3. Stainless steel screws with cylindrical head, ultra-lowered, hexalobular hollow M6 x 16mm cod.BULL18
4. Stainless steel washer, hole diameter 6mm, external diameter 12mm cod.BULL22
5. Shell in carbon fi ber or aluminum (size chosen when ordering)
6. Stainless steel screw with cylindrical head hexagon socket M6x16mm cod.BULL31
7. Universal clamp for wheelchair with rigid frame cod.ALCMT36 (composed of: ALCMT36.3_ Hardened pin
d.6x50mm DIN 6325; + possible POM-C adapter for tube diameter 19mm ALCMT36.1 or ALCMT36.2 for tube
diameter 22mm )
6
ALCMT36.2
7
ALCMT36.3
ALCMT36.1

3.2 TOOLS REQUIRED

Tool for hexagonal head screws: n.1 5mm dimension
Tool for hexalobular head screws: n.1 T20 dimension
2
5
3
4
1
ALCMT36
ALCMT36.3
ALCMT36
ALCMT36.3
ALCMT36.2
ALCMT36
ALCMT36.3
ALCMT36.1
19 ENG