Honeywell HE220A Mode D'emploi page 3

OPERATING YOUR HUMIDIFIER
HE225A,HE265A
Your Enviracaire Elite™ HE225A and HE265A
Humidifiers from Honeywell are controlled by the
H8908B Convertible Humidity Control. The
convertible humidity control is installed either on an
interior wall in the living area, or on the return air duct.
Choose the humidity control setting using the
combination relative humidity/outdoor temperature
setting scale on your humidity control dial. Match the
dial setting to the outdoor temperature for optimizing
the humidity level while reducing moisture conden-
sation on your windows. The table below can also be
used to adjust humidity control to the recommended
setting.
At Outside
Temperature
-20°F (-29°C)
-10°F (-23°C)
0°F (-18°C)
NOTE: As outside temperature drops, the recommended humidity control setting is
lowered to adjust for effects of dewpoint. These settings should reduce accu-
mulation of moisture and ice on your windows and other areas of your home.
Some indoor activities such as cooking, showering and clothes drying can cause
excessive levels of humidity and start the accumulation of moisture on your windows.
NOTE: If this condition persists for more than a few hours, set the humidity control to
the lowest setting to turn off the humidifier. If the condition does not improve,
ventilate your home to remove the moisture.
HE225B,HE265B
Your Enviracaire Elite™ HE225B and HE265B
Humidifiers are ontrolled by the Honeywell H1008
Automatic Humidity Control with HumidCalc+™. The
automatic humidity control is mounted in the return air
duct where it can be exposed to the air stream of the
return air.
All manuals and user guides at all-guides.com
HE225A,B AND HE265A,B BY-PASS FLOW-THROUGH HUMIDIFIERS
Recommended
Control Setting
15
20
25
3
At Outside
Temperature
+10°F (-12°C)
+20°F (-7°C)
Above 20°F (-7°C)
H1008A
M14694
Recommended
Control Setting
30
35
40
M12817
69-1423EF-3