Publicité
QUICK INSTALL GUIDE
TECHNICAL SPECIFICATIONS
Model
Part Number
Dimensions
Weight
Interface: Ethernet Uplink (Trunk IP)
Interface: Downlink (PoE and IP to adapter)
Power Supply
Power Consumption
Power Injection (PoE)
Operating Temperature
Humidity
Model
Part Number
Dimensions
Weight
Mounting
Interface Switch Side
Interface Ethernet Side: For IP Endpoint Device
Power Injection (PoE)
DC IN
(Screw Terminal)
Power Consumption
Operating Temperature
Humidity
Specifications subject to change without notice.
888.901.3633 | +44 (0) 208 977 6614 | www.nvtphybridge.com
All manuals and user guides at all-guides.com
EC10
NV-EC-10
(HxWxD) 1.77" x 7.01" x 4.72" (4.5cm x 17.8cm x 12cm)
0.763lb (0.346kg)
2 RJ45 ports: 10/100/1000 Base-T autosensing independent speed
selection, Ethernet IEEE 802.3, CATe/6 copper cable
10 x BNC Jacks
Speed: 100Mb/s (full duplex)
PoE Power: 25 Watts Maximum
Maximum Distance:
• 1,500ft (457m) over RG59 Coax Cable
• 2,000ft (610m) over RG6 Coax Cable
• 3,000ft (915m) over RG11 Coaxial Cable
48 – 56 VDC (55 VDC, 165W power supply included)
3.8W
48 – 56 VDC
Endpoint devices must be compliant with IEEE 802.3af / 802.3at
14°F to 122°F (-10°C to +50°C)
10% to 95% (non-condensing) at 35° C
EC-Link
NV-ECLK
(HxWxD) 0.83" x 1.23" x 3.46" (2.1cm x 3.2cm x 8.8cm)
1.26oz (36g)
Inline between the CAT5 cable (to IP endpoint) and the COAX cable (to
CLEER/EC Switch)
1 BNC port: COAX cable – RG59, RG11, RG6
1 RJ45 port: 10/100 Base-T, IEEE 802.3af/at
DC voltage on RJ45 port: 37V – 56V
Endpoint devices must be compliant with IEEE 802.3af/at
Optional
48 – 56VDC via an external AC/DC Power Adapter (IEC Class II isolated
only)
0.9W
-58°F to +158°F (-50°C to +70°C) Tests conducted against
international safety standard at maximum ambient 50°C
10% to 95% (non-condensing) at 35° C
Copyright 2020 NVT Phybridge | 413-0006-C | Page 4
Publicité
