asalvo BABY Instructions Pour Le Montage Et L'utilisation page 9

ASSEMBLY
1
Insert the two side bases (left and right side) into the tubes on the seat, as in
1-1 and 1-2. Ensure that the bases are in the correct position, as in Fig.1-3
Fig.1-1
2
Insert the two lateral
bases into the
perpendicular support
until the buttons enter the
fi xing holes.
Fig.2-1, make sure that the
perpendicular support is in
the correct position, as in
Fig. 2-2
3
Place the plastic hook of
the toy arch on the sides
of the hammock frame.
Be careful: make sure that
the plastic hooks can be
stopped at the front of the
black washers, as in Fig.3
All manuals and user guides at all-guides.com
Fig.1-2 Fig.1-3
Fig.2-1
Fig.2-2
Fig.3
EN