Publicité
Les langues disponibles
Les langues disponibles
Operation
1.
See the Settings Table. Set the selector to the proper setting, press Select (when
instructed to do so), and connect the test leads to the meter.
2.
See Typical Measurements for specific measurement instructions.
3.
Test the unit on a known functioning circuit or component.
• If the unit does not function as expected on a known functioning circuit, replace the
battery and/or fuses.
• If the unit still does not function as expected, send the unit to Greenlee for repair.
4.
Take the reading from the circuit or component to be tested.
Note: To Use the Relative Zero Function — While taking a measurement, press Rel ∆ to set
the display to zero. The ∆ icon will appear on the display. Take the second measurement. The
value on the display will be the difference between the two measurements.
All manuals and user guides at all-guides.com
Electric shock hazard:
Contact with live circuits can result in severe injury or death.
DM-500 • DM-510
11
Publicité
