Samsung MX-JS8000 Guide D'utilisation page 22

Functions
Setting the Timer
The timer enables you to set the product to switch
on or off at specific times automatically.
• Before setting the timer, check that the current
time is correct.
• For each step, you have a few seconds to set
the required options. If you exceed this time,
you must start again.
• If you no longer want the product to be switched
on or off automatically, you must cancel the
timer by pressing the TIMER ON/OFF button.
Example: You want to wake up to
music every morning.
1. Press the TIMER SET button until TIMER
PLAY SET is displayed.
Press the ¬ button.
2.
Result: ON TIME is displayed for a few
seconds. You can set the timer switch-on
time.
3. Set the timer switch-on time.
a. Press the ,/. button on the remote
control to set the hours.
b. Press the ¬ button.
Result: The minutes flash.
c. Press the ,/. button on the remote
control to set the minutes.
d. Press the ¬ button.
Result: OFF TIME is displayed for a few
seconds. You can now set the timer
switch-off time.
4. Set the timer switch-off time.
a. Press the ,/. button on the remote
control to set the hours.
b. Press the ¬ button.
Result: The minutes flash.
c. Press the ,/. button on the remote
control to set the minutes.
d. Press the ¬ button.
Result: VOLUME XX is displayed, where
XX corresponds to the volume already
set.
MX-JS8000-ZC_ENG-0412.indd 22 MX-JS8000-ZC_ENG-0412.indd 22
All manuals and user guides at all-guides.com
5.
6.
7.
8.
22
English
Press the ,/. button on the remote control
to adjust the volume level and press the ¬
button.
Result: The source to be selected is
displayed.
Press the ,/. button on the remote control
to select the source the Hi-Fi Component will
play when it switches on.
If you select You must also
a. Press the ¬ button.
FM (radio)
b. Select a preset station
by pressing the ,/.
button on the remote
control.
CD (compact Load a compact disc.
disc)
USB1/USB2 Connect a USB device.
Press the ¬ button.
Result: TIMER REC SET (Do you want to
record?) is displayed.
Press the ¬ button.
Result: REC SET YES/NO is displayed. You
can press the ,/. button on the remote
control to select REC YES or REC NO, and
then press ¬ button.
1) If you select REC NO, it will cancel tuner
timer recording and any currently set tuner
timer recording. Note that selecting REC
NO does not cancel the Timer setting.
2) If you select REC YES, you can set the
tuner timer recording on and off times.
a. Press the ¬ button.
Result: ON TIME is displayed for a few
seconds. You can set the tuner timer
recording switch-on time.
b. Press the ¬ button.
Result: OFF TIME is displayed for a
few seconds. You can set the tuner
timer recording switch-off time.
2016-04-12 2016-04-12 10:16:49 10:16:49