Publicité
Les langues disponibles
Les langues disponibles
2.1 Hardware Installation
LED Indicator
The Power LED will be ON when the unit is powered up.
The Link LED will be blinking indicates a WLAN connection.
Check the installation
The LEDs of the Wireless USB 2.0 Adapter are clearly visible and the status of the
network link can be seen instantly:
When connected to the USB port and the driver was installed, the LNK LINKwill
start blinking, it means that the device is starting to scanning a 802.11g wireless
device near the Wireless USB 2.0 Adapter.
While the Wireless USB 2.0 Adapter linked up to the Access Point or to other
Wireless LAN station, the LNK LED will always blinking.
Wireless 108Mbps USB Adapter
6
Publicité
