Philips HF3650 Mode D'emploi page 14

English
14
Time
Display settings
Press this icon to open the time menu.
In this menu you can change the time by pressing + or -.
Press the time notation icon to toggle between the 12-hour clock and 24-hour
clock.
Press the display settings button in the settings menu to set the display settings.
In the display settings menu, you can deactivate and reactivate the audio
feedback, adjust the display brightness, switch the display on or off and select
shortcuts.
Audio feedback
If you do not want to hear clicks when you press an icon, press the audio
feedback icon to turn off the audio feedback. You hear one click as a
confirmation.
To reactivate the audio feedback, press this icon
Display brightness
You can adjust the display brightness from level 1 to level 6. Choose a level that
is optimal for you to see the display at night. The appliance automatically
adjusts the display brightness when the light in your bedroom changes.
Display timeout
If you do not want the appliance to produce any light, not even from the time
indication, press the display timeout icon.
Normally, if you do not touch the display for some time in any menu, the display
reverts to time and status indication only. When the display timeout is
activated, no time indication is shown.
Press the the display timeout icon to turn on the display again.
Tip: If you want to check the time or select a function while the display timeout
is activated, just place your hand near the display to turn it on for a few seconds.
.