HP PageWide XL Serie Informations D'introduction page 9

If the printer is left idle for some time, it goes into sleep mode and switches off the front-
panel display.
To change the time that elapses before sleep mode, tap , then System > Power options >
Printer sleep.
The printer can be woken from sleep mode by the Power button, by sending a print job, by
inserting a page in the scanner (MFP printers only), or by opening a door or a drawer, or
installing/uninstalling the high-capacity stacker.
Front-panel error codes
The printer may occasionally display a system error, which consists of a numerical code of
12 digits followed by the recommended action that you should take.
In most cases you will be asked to restart the printer, because when the printer starts it
can diagnose the issue better and may be able to fix it automatically. If the problem
persists after restarting, you should contact your HP support representative and be ready
to give the numerical code from the error message.
If the error message contains some other recommended action, follow the printer's
instructions.
Printer specifications
Power, environmental, physical and acoustic specifications are listed.
Power specifications
Use the electrical cord supplied with the printer and the power supply voltage specified on
the label. Avoid overloading the printer's electrical outlet with multiple devices.
HP PageWide XL
Pro 10000/8000
MFP
HP PageWide XL
8000 Printer
HP PageWide XL
Pro 5200
ENWW
Find information about the printer.
Access the paper library
Input voltage
~200-240 V +- 10%
Two wires + PE
~200–240 V ±10%
Two wires + PE
~200–240 V ±10%
Two wires + PE
Input frequency Maximum load
current
50/60 Hz 8 A
50/60 Hz 8 A
50/60 Hz 5 A
Access the user guide.
Power consumption
(printing)
1.2 kW
1.2 kW
0.9 kW
Front-panel error codes
7