Publicité
Les langues disponibles
Les langues disponibles
Safety edges can be delivered in a variety of formats.
1. As a set in various standard lengths to be cut by the customer and for
self-assembly – ideal for repairing doors quickly when carrying out
service and maintenance in the field.
2. As individual components in larger packaging units – suitable for
self-assembly of safety edges in industrial door manufacture.
3
Assembly of contact profiles
3.1
Overview of the individual components
Contact profiles
42
EDGH 44X49
Contact profile coil in box
Delivery format and storage of contact profile components
3.2
Contact profiles are delivered in coils inside sturdy cardboard boxes on
pallets. If they are to be put into long-term storage, the contact profiles
must remain inside the boxes and the boxes stored laid flat.
Contact end pieces, connection cables and resistor plugs are packaged
separately and must remain inside their original packaging until used.
3.3
Tools and accessories
Rubber profile cutters
Risk of injury!
Follow the safety instructions for the cutting device.
10
The assembly is described in Chapter 3 below; their installation is
described in Chapter 4.
43
EDGI 44X74
The components must be stored in a dry location. Storage temperatures
should be between 0°C and 40°C.
However, the components can be stored at temperatures from - 30 °C to
+ 60 °C for short periods of time, e.g. during transport.
Mounting profile
44
Aluminium profile
EDGL 44X99
Resistor plug
8.2 kOhm
Connection cable
cod. 806ED-0171
36
Contact end piece
Publicité
