Safety Warnings; Introducing The Product; Technical Specifications - Motorisation+ Em4X Instructions D'installation Et D'utilisation

1 - SAFETY WARNINGS

CAUTION – to ensure personal safety it is important to follow these instructions and keep them
for future reference.
Read the instructions carefully before proceeding with installation. The design and manufacture of the
devices making up the product and the information in this manual are compliant with current safety
standards. However, incorrect installation or programming may cause serious injury to those working
on or using the system. Compliance with the instructions provided here when installing the product is
therefore extremely important.

2 - INTRODUCING THE PRODUCT

RADIO RECEIVERS
Motorisation Plus radio receivers are 4-output receivers for control units with SSQ (EM4X) connector
and 2-output with external terminal board (LINK).
Receivers accept Motorisation Plus code transmitters.
The receiver EM4X can be managed via APP.
Warning: any use other than as specified herein or in environmental conditions other than as
stated in this manual is to be considered improper and is prohibited.
CODE DESCRIPTION
EM4X Plug-in receiver, 4 outputs, 433.92 MHz. Maximum memory capacity 1000 codes
LINK External universal receiver, 2 outputs 433.92 MHz. Maximum memory capacity 1000 codes

2.1 - TECHNICAL SPECIFICATIONS

Decoding
Compatible transmitters
Frequency
Power
Idle consumption
Max consumption
Input impedance
Outputs
Relay outputs
Sensitivity
Operating temperature
EM4X
FIX
MOOV4
433.92 MHz
5 Vdc
16 mA
27 mA
4
-
-108 dB
-20°+55° C
LINK
FIX
MOOV4
433.92 MHz
12÷24 Vac / 12÷35 Vdc
41 mA @ 24 Vac /
20 mA @ 24 Vdc
45 mA @ 24 Vac /
27 mA @ 24 Vdc
50 Ω
2
24 Vdc, 1 A Max, Normally Open
EN
7