Rosenbauer HEROS-matrix Info Pour L'útilisateur page 16

Rosenbauer – HEROS-matrix
the properties of the material and are prohibited or must be coordinated with
Rosenbauer beforehand. No modifications may be made to the helmet shell or
helmet liner.
WARNING: Modifications to the helmet shell or helmet liner can affect the protective
function of the helmet, causing serious injuries or even death and are therefore
prohibited.
1.5 The sole responsibility for adhering to the above-mentioned points 1.1 to 1.4 lies
with the user of the HEROS-matrix helmet.
WARNING: If the instructions in this user information are not followed, Rosenbauer
cannot guarantee that the HEROS-matrix fire fighting helmet functions without
trouble! These instructions do not extend the liability and warranty conditions of
Rosenbauer.
1.6 The HEROS-matrix fire fighting helmet was designed according to the applicable
standards; however, does not provide a guarantee that injuries are excluded.
WARNING:: The helmet absorbs energy when subjected to excessive strain, which can
cause damage to the helmet, and as a result, adversely affect its protective function.
This type of damage may not be evident right away. Every helmet that was subjected
to such severe strain must be replaced immediately!
WARNING: If an additional piece of personal protection equipment or an accessory is
added (with the exception of accessories delivered with this helmet by the
manufacturer), a helmet which is labeled to be in accordance with EN 16471:2014 and
EN 16473:2014 may not be in conformance with all sections of this standard anymore.
Reference must be made to the corresponding information, which must be supplied by
the helmet manufacturer.
WARNING: The fire fighting helmet can only offer maximum protection if it has been
properly adjusted and provides a perfect fit on the head. The helmet may only be worn
in its entirety. Removable parts may not be used singly.
16