Rosenbauer HEROS-matrix Info Pour L'útilisateur page 15

INTRODUCTION
These instructions are intended to help you familiarize yourself with the HEROS-matrix
fire fighting helmet, its features, use and its care. Despite the application of the
highest quality standards during the design and production, as well as a detailed final
inspection before delivery, every HEROS-matrix fire fighting helmet can only be as
good as it is treated, maintained and cared for. It is up to the user how well the
HEROS-matrix performs and protects and thus how satisfied she/he is with it.
1. SAFETY INSTRUCTIONS AND INTENDED USE OF THE
FIRE FIGHTING HELMETS
1.1 The HEROS-matrix fire fighting helmet may only be used within the range of
its intended purpose and only after completely reading these instructions. The
helmet may be worn solely by trained operations personnel according to the
guidelines/practices of fire departments. This helmet is neither approved nor
suitable for use e.g. as a bicycle helmet, motorcycle helmet, seat or stand, etc.
A use for such purposes is not allowed and prohibited.
WARNING: Use this helmet only if you have read and understood the entire user
information. Misuse of the helmet or non-observance of the user information can lead
to serious injuries or even death!
1.2 The HEROS-matrix fire fighting helmet must be stored, handled, inspected and
maintained as described in this user manual. If possible, store the HEROS-matrix
helmet in a space which is protected from light and moisture (e.g. wall closet or
similar) in order to prevent premature aging. Especially a prolonged exposure to
UV radiation must be avoided.
1.3 All repair, exchange and service work on the HEROS-matrix fire fighting helmet
may only be performed after adequate training according to these instructions A
log of all activities must be kept. Fundamental maintenance and repair work that
is not described in these user information may only be performed by qualified
personnel authorized by Rosenbauer.
1.4 The helmet shell and liner should be inspected for damage at least before and
after every operation. Especially the tight fit of all screws should checked. If
excessive damage (strain) has been done to the helmet shell, helmet liner, chin
strap or other parts, they must be replaced immediately in order to continue to
fulfill the defined protective function. Only original spare parts may be used for
the maintenance of the HEROS-matrix fire fighting helmet. Modifications made to
the helmet shell after production, e.g. painting, unauthorized stickers, can change
HEROS-matrix – Rosenbauer
GB
15