Reer Pingouin Notice D'utilisation page 7

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 9
Cleaning and care instructions
Clean the unit with a soft, slightly damp cloth. Do not use any abrasive
cleaners or solvents.
Remove the batteries if the unit will be not be in use for a longer period
of time.
Deliverables and unit description
SEC / - button
MIN / + button
SET / MODE button
Battery
Preparing for first use
The bath and room thermometer helps keep track of the temperature of bath-
water and the optimum room temperature for your baby.
After 30 minutes, the temperature display switches off, and the time is dis-
played constantly.
The temperature display can be reactivated by pressing any button.
12
LED
DISPLAY
Setting the functions
on page 6–7
Application as a bath thermometer
Before using the product as a bath thermometer, please select your pre-
ferred temperature unit: °C or °F.
You can put the thermometer in the bath when filling it with water. This
guarantees a fast and precise temperature measurement.
The stopwatch starts automatically as soon as the thermometer is placed
in the water.
Mix the water well, so that its temperature is evenly distributed.
Leave the thermometer in the water for about 90 seconds, so that the
exact temperature can be determined.
As soon as you put your baby in the water, you can start the timer. This way,
you can set a specific bathing time. After the timer runs out, an acoustic
signal will be produced.
Changing the batteries
The battery life is approximately two years, depending on the frequency of use.
If the display becomes too dim, please change the batteries.
Proceed as follows:
Remove the safety screw from the battery cover with a screwdriver.
Rotate the battery cover outwards.
Carefully remove the empty batteries with tweezers.
Insert new batteries (two LR44 button cells) and affix the battery cover.
Make sure that the sealing ring does not slip.
Add some silicone grease onto the edge of the battery cover, so that it
remains as watertight as possible.
Note: After changing the battery, it cannot be guaranteed that the device
will be watertight.
13

Publicité

Table des Matières
loading

Table des Matières