Technical Specification; General Safety Instructions - Reer Pingouin Notice D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 9
Pinguin / Digital bath and room thermometer
We would like to thank you for choosing the bath and room thermometer with
temperature alarm by reer.
With its integrated functions, you can keep track of your little darling's bathing
fun. Supported by two LED colours and an acoustic signal, you can make sure
that the bath temperature is optimal. This way, you can avoid scalding and
overcooling hazards. The timer and stopwatch functions help in keeping track
of the desired bathing time. After bathing, the thermometer can be dried with
a soft cloth and placed in your child's room for use as a room thermometer.
We are sure you and your family will enjoy the quality of our product for many
years to come. Please take a few minutes to read through the safety instruc-
tions carefully. You will only be able to use the reer bath and room thermom-
eter with confidence if all of the points mentioned here have been checked.
Please keep the instruction manual in a safe place for future reference.

Technical specification

type:
item No:
weight:
measuring range:
measuring accuracy:
excess temperature:
timer:
display:
LED:
acoustic signal:

General safety instructions

It is imperative that this safety information is observed. Failure to observe this
information will render any warranty claim void. Improper handling or oper-
ation, and any damage resulting from this (damage to property or personal
injury), will render any warranty claim void.
!
Read the instruction manual before using the equipment! It contains impor-
tant instructions on how to start and operate the product.
!
Please keep the instruction manual in a safe place for future reference.
Ensure the manual is passed on to third parties with the unit.
!
Please use the article only for its intended purpose.
10
digital Bath and room thermometer
24041
approx. 68 g
0 °C to 50 °C
+/- 1°C
can be set from 37 °C to 40 °C/99 °F to
104 °F; default 39 °C
can be set for up to 59 min 59 sec
LCD display
blinking green < 30 °C, blinking red if the
temperature is too high or if the timer runs
out.
if the temperature is too high or if the
timer runs out.
!
The product is only intended for private use, it is unsuitable for medical
purposes or for public facilities.
!
Repairs may only be made by our Customer Service engineers or author-
ised dealers. Do not open the equipment or repair it, as proper functioning
cannot be guaranteed in such case. Non-compliance voids the warranty. If
you have any questions about the use of our equipment, please contact
your dealer.
!
These safety instructions must be observed!
Safety instructions on first use
Remove all packaging and any surplus components before first use to prevent
your child being injured or choking.Before every use, check the equipment for
any obvious damage. If you detect any damage, do not use this equipment.
The battery (LR44) has already been inserted into the new device.
The batteries included must not be recharged or reactivated by
other means and may not be disassembled, exposed to fire or
short-circuited. Remove the batteries from the device if it is not used
for a long period of time.
With the digital bath and room thermometer by reer, you can set the optimal
bathing temperature for your baby and determine the maximum temperature.
If this temperature is exceeded, an acoustic signal is produced, and a red LED
starts blinking.
The optimum water temperature should be between 36.5 °C and 38 °C.
To avoid overcooling, the green LED blinks as soon as the water temperature
falls below 37 °C.
Warning: scalding hazard. A water temperature of more than 39 °C can lead to
severe burns to your child's skin.
The device complies with all the EU safety regulations for toys, so that safe fun
in the bath is ensured.
11

Publicité

Table des Matières
loading

Table des Matières