RHOSS TCHVBZ 1201 Mode D'emploi page 65

In order to guarantee correct and s afe functioning of the s ystem, the same must be s upplied with the following devic es:
4
8
9
1
Once the connec tions to the unit ar e made, c hec k that none of the pipes leak, and bleed the air from the s ystem.
II.2.7.2 Condenser hydraulic connection
IMPORTANT !
The layout of the water system and connection of
the system to the unit must b e carried out in
conformity with local and national rules in force.
IMPORTANT !
For correct functioning of the unit, a flo w r ate to the
recover y units must b e guar anteed that is at least
equal to the nomin al flo w r ate stated in the t able of
the Attachm ents.
The pi ping must be mec hanicall y isolated and s upported in a way to
prevent anomal ous str ess on the unit.
The di mensions of the condens er connec tions are given in the
attac hments of this manual. In or der to guarantee correct and s afe
IN
MODEL
Dimensions
j
Condenser water input
Condenser water output
MODEL
Dimensions
j
o
Condenser water input
Condenser water output
MODEL
Dimensions
j
o
Condenser water input
Condenser water output
MODEL
Dimensions
j
m
n
Condenser water input
Condenser water output
6
6
4
5
7
3
1
2
mm
GF
GF
mm
mm
GF
GF
mm
mm
GF
GF
mm
mm
mm
GF
GF
5
functi oning of the s ystem, the s ame must be supplied with the following
devices:
• air bleed val ves and c ut-off val ves must be mounted on the infeed
and outfeed pipes from the unit in or der to isolate the machine from
the res t of the s ystem and this allow the heat exchanger to be
emptied and/or any maintenanc e or removal of the same.
• A filter must be mounted on the c ondenser input piping and anti-
vibration j oints i n correspondence of the hydraulic fitti ngs.
Once the connec tions to the unit ar e made, c hec k that none of the
pipes l eak, and bl eed the air from the s ystem.
1201-1611
j
OUT
1201 1231 1281 1311
293 293 293 293
5" 5" 5" 5"
5" 5" 5" 5"
2411 2431 2461 2511
293 293 293 293
650 650 650 650
5" 5" 5" 5"
5" 5" 5" 5"
2781 2841 2901 2961
293 293 293 293
650 650 650 650
5" 5" 5"
5" 5" 5"
31301 31351 31401
294 294 294
360 360 360
360 360 360
5" 5" 5"
5" 5" 5"
65
SECTION II: INST ALL ATION AND MAINTEN ANCE
IN=Water input
OUT=Water output
1. Shut- off valve;
2. Drain;
3. Filter(0.5 mm square mes h);
4. Thermometer;
5. Anti-vi bration dilation j oint;
6. Manometer;
7. Flow s witch;
8. Regulation val ve;
9. Air vent.
2411-21261
j
o
1351 1421 1481 1531
293 293 293 293
5" 5" 5" 5"
5" 5" 5" 5"
2561 2601 2631 2681
293 293 293 293
650 650 650 650
5" 5" 5" 5"
5" 5" 5" 5"
21031 21111 21181
293 293 293
650 650 650
5" 5" 5" 5"
5" 5" 5" 5"
31461 31521 31591
294 294 294
360 360 360
360 360 360
5" 5" 5"
5" 5" 5"
31301-31631
j
m n
1611
293
5"
5"
2711
293
650
5"
5"
21261
293
650
5"
5"
31631
294
360
360
5"
5"