Thrane & Thrane Explorer 300 Mise En Route page 7

CHOOSING AN INTERFACE FOR DATA CONNECTION
The EXPLORER 300 has two types of interface for data connection: LAN interface
and Bluetooth interface.
The following table shows some characteristics of each interface, to help you
choose the right interface for your application.
Interface Power Consumption
LAN High
Bluetooth Medium
MAKING A LAN CONNECTION
To make a LAN connection, simply connect the LAN cable between your computer
and the LAN connector on the EXPLORER 300, and start up the EXPLORER 300 as
described in the beginning of this document.
As soon as the display of the EXPLORER 300 shows READY, the connection is
established automatically.
You are now ready to browse the Internet, check e-mails, send files etc.
NOTE: For information on configuration, refer to the User Manual.
All manuals and user guides at all-guides.com
Range
Up to 100 m of cable
Wireless connection.
Up to 25 m depending on the transmitter in the
computer and on the transmission conditions.
GB