Panasonic JS-960WP Serie Mode D'emploi page 35

(3) While pressing the tabs (2 locations), remove the top case.
p Do not use excessive force to open the top case.
(4) Remove the screws (2 locations), and remove the inside component.
(5) Remove the black cover of the fingerprint unit.
(6) Connect the cable to the fingerprint unit.
p While making sure that the connector is pointing in the correct direction, connect the
cable.
(3)-1
(4)-2
(6)-2
JS-960WP.indb 35
(3)-2
(5)
(4)-1
Screws
(6)-1
2012/02/15
35
15:20:16