Panasonic JS-960WP Serie Mode D'emploi page 20

AC Adapter Installation
(1) While pushing in the cable cover release button, slide the cable cover with both hands
to remove it.
(2) Connect the DC output connector of the AC adapter to the DC input connector.
p Push the AC cord connector all the way into the AC IN side of the AC adapter to
connect it.
p Pull gently on the connector to make sure that the connector is locked in place. After
pulling on the connector, push it in again.
(3) Push firmly on the cable cover with both hands until it clicks to lock it into place.
(4) Carefully replace the main unit on a clear, flat surface.
(1)
Cable cover
release button
(4)
20
JS-960WP.indb 20
(2) (3)
2012/02/15 15:19:29