Operation - Tenovis Prima 910 T Notice D'utilisation

5

Operation

5.1 Starting a call
5.1.1 Dial number - no correction possible
b t
Dial number
5.1.2 Dial number - correction possible
a t
Dial number
To change the number or to correct a wrong entry, select the wrong figure with the arrow
C
buttons and press
If you wish to conduct the call using the handset, just lift it up after dialing the number.
Any time during a call you can switch back and forth between hands-free calling, spea-
ker function and use of the handset.
After you have dialed the number you can also press the speaker button to have the
number dialed and to use hands-free calling.
If a call can not be put through, e.g. number is inhibited via the calling filter, or the ac-
count for the number/MSN is empty, this message will appear in the display »Number
inhibited«.
5.1.3 Other options for dialing without lifting the handset
The option of dialing without lifting the handset and of correcting or adding to a number
also exists during dialing:
•
from the redialing memory.
•
from the caller/memo list.
•
from the telephone directory.
•
from the short dialing memory.
•
from the direct dialing memory.
If you are using one of these options, you can make further entries prior to initiating
the call. You can define which number (MSN), if any, is to be transmitted to the party
being called.
g
b g
to delete it.
31