Tasco 119422 Notice D'utilisation page 19

Parameter
Time Lapse
Video Sound
(only affects
video clips)
Default Set
All manuals and user guides at all-guides.com
Description
Settings
(Bold=default)
On, Off Turns Time Lapse recording mode on/
off. Pressing OK after selecting On will
change to the Set Time Lapse screen,
which allows you to set the Start and
Stop times in hours (0-24) and minutes
(00-59).These set the times each day
that recording begins and ends (24
-hr clock, so 13:00 hours=1PM). Use
the RIGHT key to step through the
fields, and use UP/DOWN to change
the settings. After you set the "Stop"
minutes, the next press of the RIGHT
arrow key will jump to the screen for
setting the Interval (how often the Trail
Cam will "wake up" and record). You
can select 60, 30, 15, 5 or 1 minutes
(default is 5M).
On, Off Select "On" to record audio along with
the video when the camera is set to
video mode (saved file sizes will be
slightly larger).
Cancel,
Select "Execute" and press OK to
Execute restore all parameters to the original
factory default settings. If the camera is
behaving oddly and you think you may
have changed the setting for something
accidently (but aren't sure which one),
this will reset all parameters to their
most commonly used or "generic"
settings.
19