afriso CosiTherm FT Notice Technique page 37

5.4 Inserting a battery (optional)
In the case of daylight with an illuminance of less than 200 lux, use an
optional battery (see "Technical data", not included).
1. Remove the rotary knob and the upper part of the housing (see "Mounting
the product").
2. Insert the battery into the battery compartment (A).
- Verify correct polarity.
3. Fit the upper part of the housing and the rotary knob to the bottom part of
the housing.
Mounting
7. Fit the upper part of the
housing and the rotary
knob to the bottom part of
the housing.
- Verify correct position
with reference to the axis
of rotation when insert-
ing the rotary knob.
FT / FTF
EN
14