Publicité
Les langues disponibles
Les langues disponibles
5
Mounting
5.1
Preparing mounting
If you want to install several products, create an installation plan with the indi-
vidual installation sites. Label the individual products according to the instal-
lation plan with a number or the designation of the installation.
Verify that all connected devices can be used at the installation site.
Verify that the installation site is not in shielded areas or recesses.
Verify that the solar-operated energy storage module has been charged.
- Regular daylight is sufficient for charging the energy storage module.
- Exposure to direct sunlight reduces the charging time.
5.2
Connecting the product via EnOcean
Prior to mounting the product, connect it to the EnOcean components (see
chapter "Connecting the product to a controller module").
5.3
Mounting the product
Mounting
If the wall is uneven, stick the product
to the wall using the adhesive dots
supplied.
Screw or glue the product to even
walls.
FT / FTF
EN
10
Publicité
