Attaching The Carrying Strap - AEG BK 6 Mode D'emploi

20
▪
Promptly wipe up any condensation. after extended cooling periods moisture will con-
dense into water drops inside the coolbag. This does not mean the device is defective.
▪
Wait approx. 5-10 min when switching between cooling and heating to allow the
heating/cooling electronics to reach the correct temperature.
▪
do not use ice packs or ice bags in the board bar. Melt water can damage the board
bar.

Attaching the carrying strap

Fig. 1
Fig. 3
attach the included carrying strap in the order Fig. 1 to 5.
Fig. 4
Fig. 2
Fig. 5