Intended Use; Unpacking The Device - AEG VL 5527 MS N Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 13
English
26
• Do not try to repair the appliance on your own. Always contact
an authorized technician. To avoid the exposure to danger, al-
ways have a faulty cable be replaced only by the manufacturer,
by our customer service or by a qualified person and with a
cable of the same type.
• This appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental ca-
pabilities or lack of experience and knowledge if they have been
given supervision or instruction concerning use of the appliance
in a safe way and understand the hazards involved.
• Children shall not play with the appliance.
• Cleaning and user maintenance shall not be made by children
without supervision.
Scope of delivery and parts description
1 Installed safety grids
2 Propeller
3 Hook
4 Locking screw for propeller
5 Rear protective grid
6 Flattened area on the motor shaft
7 Motor
8 Rotary switch for speed
9 Control knob for oscillation
10 U-shaped fixing
11 Fastening nut
12 Front protective grid
13 Fastening screw for protective grid
14 Power cord
15 Stand
16 Weight
17 Washer
18 Offset screw
19 Knurled thumbscrew for height adjustment
20 Pedestal tube
21 Small knurled screw
22 Limit bolt
23 Knurled nut for carriage bolt
24 Carriage bolt
Without illustration
4 screws for rear protective grid

Intended use

This appliance is a fan intended for rooms of up to 40 m².
Do not use for other than its intended use. Use only accord-
ing to the instructions in this manual. Do not use for commer-
cial purposes.
Using the device for other than its intended use can result in
property damage or injuries.
The firm ETV – Elektro-technische Vertriebsgesellschaft mbH
is not liable for damage caused by improper use.

Unpacking the Device

1. Remove the device from its packaging.
2. Remove all of the packaging material such as foils, filling
material, cable holders and cardboard packaging.
3. Check the scope of delivery.
4. Check the appliance for any transport damage to prevent
a hazard.
NOTE:
There may still be dust or production residues on the sur-
face of the device. We recommend that you quickly wipe
off the housing with a damp cloth.

Publicité

Table des Matières
loading

Table des Matières